Aesthetically Presentable
Unlike other gloves, our
unique glove packing method
eliminates glove creases –
giving you an ironed finish.
Finger Tip Textured
All our nitrile gloves are
finger textured for that
added handling precision.
Proven Protection
Gloves are clinically tested
to handle against a wide
range of chemicals which
also comply with food
safety standards.
Hygienic
Our fully automated
glove production process
eliminates any possible
human contamination
from production down
to packing.
Comfortable & Stretchy
The ability of our gloves to
not only expand, but to also
retract according to your
hand movements rewards
you with a free range motion.
Extended Version
Longer cuff available
for that extra protection
against splashes over the
wrists and arms.
Beaded Cuff
Increased strength &
ease in donning.
With an alternating layering method, each top layer glove cuff will always completely cover the fingers of its immediate bottom layer glove. Hence, exposing only the top most layer for the wearer to pull. Therefore preventing accidental pulling of the bottom layered gloves. This results in zero wastage. Moreover, a neatly packed glove box will prevent creased gloves therefore speeding up the process of dispensing and donning.
 |
 |
Product conforms to the following test standards:
| ASTM D6319 | Standard Specification for Nitrile Examination Gloves |
| ASTM D412 | Tensile Properties of Vulcanised Rubbers |
| ASTM D573 | Accelerated Aging for Latex (at 70°C for 166+-2hr) |
| ASTM D5151 | Standard Test for Detection of Holes in Medical Gloves |
| ASTM D6124 | Standard Test Method for Residual Powder on Medical Gloves |
| ISO 2859-1 | Sampling Procedures for Inspection by Attributes Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection |
| CHARACTERISTIC | SAMPLING PLAN | INSPECTION LEVEL | AQL |
|---|---|---|---|
| Watertight Test | Multiple Normal | G1 | 1.5 |
| Visual Test | Single Normal | S4 | Major 2.5 / Minor 4.0 |
| Physical Dimension | Single Normal | S2 | AQL 4.0 |
| Physical Properties | Single Reduced | S2 | AQL 4.0 |
| Particulate Residue | N/A | N=5 | <2mg glove |
| SIZE | EX SMALL | SMALL | MEDIUM | LARGE | EX LARGE |
|---|---|---|---|---|---|
| Palm width ± 4 mm | 76 | 86 | 98 | 107 | 115 |
| Glove length (mm) | Min 230 |
| TEST | BEFORE AGING | AFTER AGING |
|---|---|---|
| Tensile Strength (MPa) | Min 18.0 | Min 16.0 |
| Elongation (%) | Min 500 | Min 400 |
